Model 5810 Dyn-O-Seal

CLICK HERE FOR PRINTABLE/ELECTRONIC SUBMISSION PDF

Vent_5810 Vent_5810dim1 Vent_5810dim2

STANDARD SPECIFICATIONS

  • FRAME: 14 ga. galv. press formed steel with welded corners.
  • BLADES: 16 ga. galv. steel with press formed reinforcements
  • MAXIMUM TEMP: 160°F.
  • AXLES: 1/2" dia. x 2" long plated steel rods.
  • BEARINGS: 1/2" dia. self lubricating porous bronze.
  • CONTROL ROD: 1/2" dia. x 9" long plated steel.
  • HARDWARE: Plated steel center brackets, brass pivots, 1/4" or 5/16" dia. plated steel linkage rod.
  • BLADE EDGE SEALS: Dyn-O-Grip extruded dual durometer vinyl.
  • SIDE SEALS: Spring Stainless Steel.
  • FINISH: Standard Mill.
  • MAXIMUM TEMP: 160°F.
  • MAX. VELOCITY: 2000 fpm.
  • MAXIMUM SINGLE SECTION: 48" x 72"
  • MINIMUM SIZE: Model 5811 6" x 8"
    Model 5812 8" x 12"
    Model 5813 12" x 12"

OPTIONS

  • -09 Tack Weld Hardware
  • -12 Nylon Bearings (Bushings
  • -13 Stainless Steel Bearings (Bushings)
  • -14 Stainless Steel Bearings Pins (Axles)
  • -20 Vertical Blades
  • -24 Right Angle Mixing Set-Up, Internal Linkage
  • -25 Right Angle Mixing Set-Up, External Linkage
  • -26 Face & Bypass Set-Up, Vertical, Internal Linkage
  • -27 Face & Bypass Set-Up, Vertical, External Linkage
  • -28 Face & Bypass Set-Up Horizontal, Internal Linkage or Jackshaft.
  • -31 Flange, 1 1/2" fastened to damper frame (opposite linkage).
  • -89 Sleeve
  • -90 Jackshaft
  • -92 Actuators
5813air 5813leak 5813leack1

Vent Products certifies that the Model 5813 damper shown herein is licensed to bear the AMCA Seal. The ratings shown in Airflow
Chart 1 and Leakage Chart 2 are based on tests and procedures performed in accordance with AMCA Publication 511 and comply
with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance ratings
and air leakage ratings.

User Notes

  1. Using the box below, write your notes.
  2. Click the 'Generate Savable Copy' button, which will pop up a new window with your notes in the text box.
  3. In the new window use the tool bar and choose 'File -> Save As' to save a copy of this webpage to your computer. Make sure you select the 'Save Complete Webpage' option, so the images are included.

You can now view and edit your notes on your copy of the webpage. To make additional changes to copy saved on your computer, follow the same process as outlined above.